MGP 2 – Stain remover for oily stains

Application

SHAKE WELL BEFORE USING. READY TO USE PRODUCT, DO NOT DILUTE.

Cover the whole stain with a good amount of MGP 2. Wait until the product turns into a white and powdery spot. Once the product is completely dry suck up the white powder with a vacuum cleaner and rinse out with water. If the stain has faded but there is still a halo left, repeat the application with MGP 2 on a larger area or clean with MGP 25. Do not use on wet surfaces. Multiple applications may be required. Do not use on materials other than those indicated.

Warnings

Before using the product, read the toxicological data sheet (MSDS) and the label detailing all risks and the personal protective equipment to be used for a correct use. The data of this technical data sheet is based on reliable information. Despite of this, not knowing either the materials to be treated nor their conditions, the specific characteristics, the processes and finishes they have undergone , the conditions of the treated materials and the way in which the product will be used, we decline any and all responsibility for damage arising from inadequacy of the product for specific and particular applications.

Therefore, before using the product, carry out a test on an invisible area of the surface and only when sure about the success, proceed on a larger area.

Our responsibility is limited to the cost of the purchased product and therefore we are not liable for damages resulting from negligence or incorrect or different use of the product, from not following these warnings or by other factors that do not depend on the product itself.