Betonwax – Protective sealer for concrete and microcement surfaces

Application

SHAKE BEFORE USING

READY TO USE PRODUCT, DO NOT DILUTE.

BETONWAX should be applied on surfaces previously treated with BETONSEAL. Apply directly onto the dry surface spreading it out evenly with a microfiber cloth with circular motions.

Apply 1 or 2 coats depending on the desired effect.

In case of very rough or large surfaces apply with a low pressure gun and spread it out evenly with a microfiber cloth.

Wait at least 48/72 hours before carrying out staining tests, so to allow the product to dry even in the porosity of the surface.

For the ordinary maintenance of the treated surface we recommend the regular use of MGP 24 detergent.

Coverage: 1 litre for approx. 10-15 m2 depending on the finish of the surface and on its absorption.

Warnings

Before using the product, read the toxicological data sheet (MSDS) and the label detailing all risks and the personal protective equipment to be used for a correct use. The data of this technical data sheet is based on reliable information. Despite of this, the manufacturer can’t know in advance the condition of the materials to be processed and the way of use of the product. Therefore, he disclaims any and all responsibility for damage arising from inadequacy of the product for special applications.

Before treating or cleaning surfaces, carry out a test on an invisible point to prevent possible damages, since our responsibility is limited to the warranty of the purchased product and therefore we disclaim any responsibility for damages resulting from negligence or wrong use.